800Mhz-7GHz Through Type Detector Comparator Standing Wave Protection FOR RF POWER Amplifier 915M 1.2G 1.5G 2.

800Mhz-7GHz Through Type Detector Comparator Standing Wave Protection

FOR RF POWER Amplifier 915M 1.2G 1.5G 2.4G 5.8G

800mhz-3ghz / 1.5G-7GHz detector comparator Through type detector Integrated directional coupler Standing wave protection TTL FOR Ham Radio RF POWER amplifier

The pass-through detector is a module that integrates microstrip line directional coupler, diode detector, comparator and other components on the board. The detector module can work in the frequency range of 1.5G~7GHz 800Mhz-3Ghz

USB Type-C power supply Can directly output 3.3V TTL signal.

Usage:

USB port access 5V power supply (maximum 5.5V)

When the output power needs to be measured. The left side is the RF input. The right side is the RF output

When it is necessary to measure the reflected power. The left side is the RF output. The radio input is on the right.

V: Detection (envelope) signal

Logic: TTL logical signal output

Vref point: comparator reference voltage

The comparator reference voltage can be adjusted by a 3303W patch potentiometer

When the detection voltage is lower than the reference voltage, the TTL output is low

When the detection voltage is higher than the reference voltage, the TTL output is high.

The green LED is a power indicator that lights up after the USB is inserted.

The blue LED is the TTL output indicator, which lights up when the TTL output is high.

Application scenarios: bidirectional power amplifier (TR component) transceiver switching, power amplifier output standing wave protection, input-output monitoring, etc.